Fiberworks PCW 4.1.2.4 Silver Plus Zip for Dialup connections

Download 4.1 Silver Plus

Smaller file - 2,537 Kb.
Suitable for dialup connections.

Drafting, design and weaving program.

4.1 Silver Plus is Silver with the loom control for computer assisted looms with 4 to 64 shafts and 9996 picks.

Best suited for multishaft shaft weavers with dobby looms.
NEW - Now with Toika loom drivers.

Current version is Silver Plus 4.1.2.4

Click here for Silver Plus Setup file, suitable for high speed cable and DSL connections.

Easy, no fuss installation. It does it all for you.

PURCHASE OF PCW 4.1 SILVER PLUS

Please proceed to Purchase Order form to place an order for PCW4.1 Silver Plus.
Your validation code will be sent after we have received the Program ID and payment.

If upgrading from Silver 4.0 to Silver 4.1 contact us.
We will require your full name, address and your Customer or Registration number.

DOWNLOAD 4.1 SILVER

Click on the PCW4 Silver icon above.
Proceed with your browser's instruction dialogs.
Click on Save
The browser will get the silver4116.exe file and ask you to save it to your computer,
in My Documents, for instance.

The silver4120.exe is a self extracting zip file that is 2081 Kb.
Download may take 1 to 10 minutes depending on net traffic and your internet connection.
High speed connection will take less than 1 minute, perhaps 20 seconds.

For Download problems, go to FAQs
To install the downloaded program, print these instructions for future reference
Save the downloaded file to CD for safekeeping.

INSTALLATION OF 4.1 SILVER

The installation file is a Self Extracting Zip file. You do not need a copy of WinZip.
Open the installation file which you saved to your computer.

A dialog with a brief set of instructions will open. Read and OK.

Another dialog pops up showing the location to which the file will be unzipped, high lit in blue.
Make a note of this location.
It should be C:\Fiberworks S4116

•    Click on UNZIP
•    Do not click on RUN WINZIP
•    A new dialog pops up that tells you that “45 files unzipped successfully”
•    Click OK button on this dialog
•    Click Close button on the Winzip dialog

Your 4.1 Silver program is now installed in the C:\Fiberworks S4116 folder.

SHORTCUT ON DESKTOP

•    Open My Computer, choose Local disk C: and navigate to and open
     Fiberworks S4116 folder.
     You should see the icon for PCW listed as MFC Application in the folder.
•    Right click on this icon, but don't open the program.
     A menu appears with Send To › near the middle of the list.
•    Move the cursor carefully down and to the side and click on
     Desktop (create shortcut)

This will place the Silver 41 shortcut on the desktop.
It may be hidden under an open Window.

•    Open My Computer, choose Local disk C: and navigate to and open
     Fiberworks B4116 folder.
•    Open the folder Silver 41 manual. Look for Silver manual.pdf file
     PDF file icon is grey with a red bar and a red swirl
•    Right click on the Silver manual.pdf file
•    A menu appears with Send To › near the middle of the list.
•    Move the cursor down and then to the side and click on Desktop (create shortcut).

This will place the shortcut to the Silver manual on the desktop.

4.1 SILVER VALIDATION

•    Close all Windows.
•    Open Silver 4116 program by double clicking on the desktop icon.
•    The validation dialog will appear.
•    Near the top you will see “Your Program ID ” with a 6- 10 digit number
     containing a hyphen.
•    Copy this number exactly into an email message along with
     your customer number if you have one, name, address, program version and
     version of Windows
•    Send this number by email to us at   info@fiberworks-pcw.com
•    We will send you the validation code by return email.
•    Until you receive the validation code, you may use the program indefinitely,
     but it will not save or print.
•    Once you have received the Validation Code, enter it into the 4 small boxes below
     the Program ID.
     Make sure that you have typed over the "0", and do not add any extra spaces.
•    Click on the Close button in the dialog.
•    A message pops up telling you that the program has been successfully validated.
     The validation dialog should not appear again.

If you install PCW 4.1 on a second computer, or a new computer, send us the new Program ID and we will send you another validation code.

Different validation codes are used to activate Bronze, Silver or Silver Plus with AVL or Silver Plus with all other looms (Not AVL).

If the validation dialog keeps appearing, either we or you have made a typo, or your security may be set very high, or you have an old version of Windows.
Your computer may have generated a new code because of a major Windows upgrade.
Resend the Program ID and we will check it and generate a new validation code. If you have Windows 95, the validation will not work, in which case, contact us to obtain a different CD.

IMPORTANT NOTICE

Fiberworks programs are password protected. Until they are validated, you can use it as a Demo.
The program will open and you may use all the features except
Save, Save As, Print, and Preview and Print.

TECHNICAL HELP

If you can't find it in the manual, or in the help files, try our FAQs page.
If all else fails, please contact us.

• Email: info@fiberworks-pcw.com
  
• Or see Contact Us 
  

Have your registration or customer number handy for help by phone, or email.
Remember, if you don't tell us, we don't know that you may have a problem.
We will probably be able to help.

Have fun designing with Fiberworks PCW4.1. Have fun weaving your designs.
Occasionally let us know what you are doing.
We would love to have a picture of your work with a draft. Perhaps, we can put it up on the web!

SOFTWARE LICENCE

© 2006 Fiberworks

Software is copyright protected.
You may not sell, give, or assign this software without our written permission.
You may use this software on any of your personal computers, one at a time.

You may freely distribute any DEMO copies of Fiberworks PCW. That is what they are for.
If you need brochures or advertising material for your friends or weaving students,
we will be happy to send them to you.

Fiberworks 4.1.0.16 Silver ©2006, All Rights Reserved