Fiberworks PCW 4.1 Bronze Setup

for High Speed Connections

   Download 4.1 Bronze

Easy Installation 
6,293Kb
Suitable for high speed cable and DSL connections

Entry Level program.

4.1 Bronze is for novice to intermediate weavers.
Best suited for 4 and 12 shaft weavers. Maximum of 16 shafts and 32 treadles. More than 20 designs are included.

Current version is Bronze 4.1.0.14

 For smaller download file when using a dialup modem, try Bronze Zip file.
 It is smaller, takes less time to download, but has a few more steps to complete installation.

PURCHASE OF PCW 4.1 BRONZE

Please proceed to Purchase Order form to place an order for PCW4.1 Bronze.
Your validation code will be sent after we have received the Program ID from you, and your payment.

If upgrading from Bronze 4.0 to Bronze 4.1 contact us for a current price.
We will require your full name, address and your Customer or Registration number.

DOWNLOAD 4.1 BRONZE

Click on the PCW4 Bronze icon.
Proceed with your browser's instruction dialogs.
Click on Save.
The browser will get the setup.exe file and ask you to save it to your Desktop.


Download may take 1 to 10 minutes depending on net traffic and your internet connection.
High speed connection will take less than 1 minute, perhaps 20 seconds.

To install the downloaded program, print these instructions for future reference
Save the downloaded file to CD for safekeeping.

For Download problems, go to FAQs

INSTALLATION OF 4.1 BRONZE

•    Click on setup icon
•    Follow the instructions in the dialogs
•    Click Next at each step
•    When it says Finish, it's done.

Your 4.1 Bronze program is now installed in
C:\Program Files\Fiberworks\PCW Bronze 41014.

The shortcut icon will appear on the desktop and also on the start menu.

A shortcut icon for the Bronze manual will also appear on the desktop and start menu.

4.1 BRONZE VALIDATION

•    Close all open Windows.
•    Open 4.1 Bronze program (Pcw.exe) by double clicking on the desktop icon.
•    The validation dialog will appear.
•    Near the top you will see “Your Program ID” a 6-10 digit number containing
     a hyphen.
•    Copy this number exactly into an email message along with
     your customer number if you have one, name, address, program version, version of
     Windows.
•    Send this number by email to us at   info@fiberworks-pcw.com
•    We will send you the validation code by return email asap.
•    Until you receive the validation code, you may use the program indefinitely,
     but it will not save, or print.
•    Once you have received the Validation Code, enter it into the 4 small boxes below
     the Program ID.
     Make sure that you have typed over all "0"s, and do not add any extra spaces.
•    Click on the Close button in the dialog.
•    A message pops up telling you that the program has been successfully validated.
     The validation dialog should not appear again.

If you install PCW Bronze 4.1 on a second computer, or a replacement computer, send us the new Program ID and we will send you another validation code. Please include your name, your customer number, your new Program ID, the version of Fiberworks you want validated and the version of Windows you are using.

If the validation dialog keeps appearing, either we or you have made a typo, or your security may be set very high, you may not have dpwnloaded the correct verion or you may not have administrator rights on your computer or you have an old version of Windows.

Your computer may have generated a new code because of a major Windows upgrade.
Resend the Program ID and we will check it and generate a new validation code. If you have Windows 95, the validation may not work, in which case, contact us.

IMPORTANT NOTICE

Fiberworks programs are password protected. Until they are validated, you can use them as a Demo.
The program will open and you may use all the features except
Save, Save As, Print, Preview and Print, and Weave.

TECHNICAL HELP

If you can't find it in the manual, or in the help files, try our FAQs page.
If all else fails, please contact us.

•    Email: info@fiberworks-pcw.com
•    Phone: 519-822-5988
•    Fiberworks PCW
     27 Suffolk St. W.,
     Guelph, ON, N1H 2H9
     Canada

Have your registration or customer number handy for help by phone, or email.
Remember, if you don't tell us, we don't know that you may have a problem.
We will probably be able to help.

Have fun designing with Fiberworks PCW4.1. Have fun weaving your designs.
Occasionally let us know what you are doing.
We would love to have a picture of your work with a draft. Perhaps, we can put it up on the web!

SOFTWARE LICENCE

© 2007 Fiberworks

Software is copyright protected.
You may not sell, give, or assign this software without our written permission.
You may use this software on any of your personal computers, one at a time.

You may freely distribute any DEMO copies of Fiberworks PCW. That is what they are for.
If you need brochures or advertising material for your friends or weaving students,
we will be happy to send them to you.

Fiberworks 4.1.0.14 Bronze ©2007, All Rights Reserved